Taking care of your vinyl wrapped vehicle is essential. It is not right to just install and forget about it. A vinyl-wrapped car needs you to regularly clean and maintains it. If all you want for you vinyl wrapped vehicle is vibrant, longer-lasting color, wash the wrap regularly and keep it far away from pollutants.
Well, this is how to take care of your vinyl wrapped car. The steps include the do’s and don’ts. For good result, it is advisable to follow them to the letter.
First, blend hand wash with mild detergent and clean water, apply it on vinyl graphics. Do not use pressure washing as it can cause your vinyl wrap lift around the ends. It can also damage face film. This will lead to graphics losing luster, fading, cracking and even come out.
How to Get Maggots Out of Car Carpet
Second, you need to test the cleaning solution before using it. Use a small portion of vinyl graphic for testing. Make sure you use products that are friendly to the environment as well to your vinyl graphics.
Third, the car care products have warning labels on them. Ensure that you read them very carefully for proper and safety instructions.
Fourth, using the blended soapy water, wash your vehicle from its top going down and then rinse it using clean water. By doing this, the all the contaminants and dirt will run off your vinyl.
The bucket you use should be clean and grit free. Also, use a garden hose (should be standard) and a nozzle to ensure vinyl is not scratched.
Fifth, allow the vehicle air to dry. Alternatively, dry it off using a microfiber cloth. After vehicle air dries off, touch it up using a soft cloth. It is vital for spotting.
If you use your hand to dry the vehicle wrap, the towels you use should be clean and microfiber. Be sure to use light pressure. Be very careful to avoid scratching vinyl or even to lift edges.
Sixth, see to it that fuels and substances that are highly corrosive are not in contact with your vinyl. Clean the spills immediately. Again, ensure clean all of the discharges.
There are instances where standard procedures for cleaning do not work for you to get rid of the fuel as well as the heavy debris, in such cases make use of isopropyl alcohol. Alternatively, you can use a cleaner that is citrus based with a towel. As usual, the towel should be microfiber. It will work best for you.
Seven, be careful on what you apply on your vinyl graphics. Application of wax like carnauba-based wax or any other type, matte or even carbon fiber is very harmful. It makes vinyl film weak.
Last but not least, when cleaning your vinyl wrapped vehicle, avoid mechanical brush as well as pressure washing as they may cause a lot of damages such as chipping of vinyl graphics, scratching the surface or even peeling off the edges.
Other effects show after a while like fading of the graphics, and they become dull in appearance. Use pressure washing if only you have exhausted all other methods used for cleaning.
